|
|
massey ferguson, ford tractor parts, automobile parts
massey ferguson
and ford tractor parts provided by Shweta International - India's largest manufacturer,
Exporter and Supplier, specialized in – high performance automobile
parts, tractor parts and many more.....at very Low Prices - Fast Shipping
From a Name You Can Trust -Thousands of Items in Stock….
Bronzes
Copper Lead
Overplated Copper Lead
Babbitts
We supply the best bearings we can,
We have developed a great expertise in the manufacture of high quality
Bronzes, Copper Lead, Overplated Copper Lead, Babbitts components.
Today our company enjoys a prominent position as one of India's leading
contractors in this field.
We are proud of the dedication
of each of our team members who strive to continually exceed our customers,
product and service expectations. Our customers are the lifeblood of our
business, and we are committed to supplying them with the highest quality,
competitively priced copper alloy castings.
The different type of Materials
Used in Bimetal Bushes
Bronzes
|
TYPE
SPECIFICATION |
NOMINAL
%
COMPOSITION |
PROPERTIES
|
APPLICATION |
| HF - 2
SAE 792
ISO: Cu Pb 10 Sn 10 |
80.0 Cu
10.0 Sn
10.0 Pb
|
High physicals, excellent resistance to pounding and shock,
high load capacity, good wear resistance
|
Piston pin, steering, track rollers, cylinders, rock shaft,
axle bushings, wear plate, high-impact thrust washers (hard
shaft desirables)
|
HF - 3
SAE 798 |
84.0 Cu
4.0 Sn
8.0 Pb
4.0 Max. Zn
|
Good shock, load capacity & corrosion resistance, somewhat
lower physical strength than HF - 2
|
General purpose bushing material, spring eye, rocker arm, utility
bushings (hard shaft desirables)
|
|
HF - 16
SAE 799
ISO: Cu Pb 24 Sn 4 |
72.0 Cu
3.5 Sn
23.0 Pb
3.0 Max. Zn |
Combines good friction, embed ability, compatibility with medium
load capacity, will accept higher surface speed and load
|
Heavy-duty camshaft, electric motor, automatic transmission,
hydraulic pump, gear changers
|
RS-21
Solid
Wrough
SAE 791
ISO: Cu Sn 5 Zn4
|
88.0 Cu
4.0 Sn
4.0 Pb
4.0 Zn
|
Good fatigue, corrosion resistance, shock and load capacity,
for low surface speed
|
Oscillating components, piston pin, controls, electric motors,
some automatic transmission parts
|
|
TYPE
SPECIFICATION |
NOMINAL
%
COMPOSITION |
PROPERTIES
|
APPLICATION |
H-35
SAE 480
|
65.0 Cu
35.0 Pb
|
Good frictional, lubricity, conformability, more resistant
to fatigue than Babbitt
|
Pumps, small electric motors, not for corrosive environmen
|
H-35 LT
SAE 482 |
65.0 Cu
28.0 Pb
7.0 Sn |
Good fatigue, conformability, and corrosion resistance
|
Intermediate-duty engines, pumps
|
|
TYPE
SPECIFICATION |
NOMINAL
%
COMPOSITION |
PROPERTIES
|
APPLICATION |
| H-24
SAE 49
ISO: Cu Pb 24 Sn |
74.5 Cu
24.5 Pb
1.0 Sn
|
Very high fatigue and very good corrosion resistance
|
Heavy-duty engines, pumps, compressors for soft and hard shafts
|
H-116
ISO: Cu Pb 24 Sn 4 |
73.0 Cu
23.75 Pb
35 Sn
|
Higher fatigue and very good corrosion resistance.
|
Primarily for heavy-duty engines with top load and durability
requirements (hard shafts)
|
| H-14 |
83.0 Cu
14.0 Pb
3.0 Sn
|
Highest fatigue with improved corrosion resistance.
|
Highest load capacity for diesel engines (hard
shaft)
|
|
TYPE
SPECIFICATION |
NOMINAL
%
COMPOSITION |
PROPERTIES
|
APPLICATION |
B-100
Tin Base
SAE 12
ISO: Sn Sb 8 Cu 4
|
89.0
Sn
3.5 Cu
7.5 Sb
|
Soft, good embed ability,
corrosion resistance and
lubricity.
|
Camshafts, low-load engines, motors, pumps, refrigerators.
compressors (hard and soft shafts)
|
L-100
Lead Base
SAE 13
ISO: Pb Sb 10 Sn 6 |
84.0 Pb
6.0 Sn
10.0 Sb
|
Soft, good embed ability,
lubricity, conformability,
less corrosion resistance.
|
Same as above except not used in corrosive environment.
|
| L-200
Lead Base
(Fortified)
SAE 15
ISO: Pb Sb 15 Sn As |
83.0 Pb
1.0 Sn
15.0 Sb
1.0 As
|
L-300
Lead Base
SAE 14
ISO: Pb Sb 15 Sn 10 |
75.0 Pb
10.0 Sn
15.0 Sb
|
|
|
